TENSO P-14 CONNECTORS STARTER KIT (80 Pairs with Pre-Load Clip)

Stock Code: 145415S

3 In Stock

Descriptions

Lamello Tenso P-14 Self Clamping Connectors with Pre-Load Clips are available for next day delivery from Brighton Tools

Self-clamping connector for glueing materials from 16 mm thickness

Self-clamping connector for gluing, installed in seconds
Invisible connection for maximum aesthetics
Pretensioning function, ideal for miters and connection situations from 22.5° to 180°
High clamping force for perfectly clamped joints without screw clamps and shims
Gluing aid for a wide range of applications in furniture or interior design

The Tenso P-14 is a self-clamping connector for gluing wood composites and is anchored in the positive-locking P-System groove in the workpiece in a matter of seconds. The Tenso P-14 consists of a connector half with powerful tension springs. These anchor in the counterpart and generate high pressure on the joint. This high clamping force allows the user to glue furniture parts or wood composites without clamps, protectors, tape or presses. The Tenso presses the joints together at the correct angle, always perpendicular to the cutting angle of the two workpieces. The Tenso P-14 enables the user to glue workpieces extremely quickly with time savings throughout the entire manufacturing process: efficiency in the milling of the P-System groove, inserting the connectors by hand and without glue or screws, and in the glue application and subsequent joining of the workpieces. Waiting times are completely eliminated and an assembled workpiece can be further processed straight away or made available for shipping. The Tenso P-14 is completely concealed so workpieces can be produced with perfect aesthetics without visible joints. As with the proven Lamello system, the connector can be used for almost any connection angle. This means that obtuse, acute or flat angles can also be connected, which is why the connector is often used as a gluing aid for difficult-to-clamp workpieces. The preload clip is optionally used when mitres are glued or, in the case of larger components, when several connectors must be assembled simultaneously in a row. The preload clip increases the lateral tolerance during assembly and reduces the force required to connect the Tenso P-14.

Applications:

Self-clamping furniture connector for gluing in kitchen manufacturing, furniture construction or interior fitting
Gluing aid for difficult-to-clamp joints, such as counters or wall panels in interior fitting
Gluing of pillar cladding
Furniture with 5-sided mitre connections
More complex furniture can be glued and assembled piece by piece instead of applying glue to all workpieces and clamping the furniture under tight time constraints
Dry joints before gluing with the Bisco P-14
Butt joints from a material thickness of 15 mm
Mitre connections from a material thickness of 18 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 1 mm
Installation tolerance radial	± 1 mm
Minimum workpiece width	75 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	19 mm
Minimum material thickness for angle bisector	18 mm
Adjustment Lamello-System	Max.
Adjustment P-System	P-14
Size (LxWxH)	66 x 27 x 9.7 mm
Strength	Depending on the adhesive