Lamello K20 Plastic Biscuit Clamping Aids are available for next day delivery from Brighton Tools
The clamping element, which holds the workpiece in position
Clamping element in size 20 for gluing
Lateral barbed ribs hold components in position
Application in combination with wooden biscuits for high joint strength
All angle and miter joints from 22.5° to 180°
Ideal for fillers or covers
The K20 is a clamping element of the same size as the original wooden biscuit size 20. The furniture connector K20 has lateral adhesive strips that anchor into the 4 mm groove when inserted. The clamping element is ideal for workpieces that are difficult to clamp, such as face frames or covers. It is able to hold workpieces in the correct position until the adhesive is dry. Since the adhesive does not adhere to a plastic surface, it is advisable to use wooden biscuits and K20 biscuits in alternation. The K20 holds the component in position and the wooden biscuit gives the wood joint its ultimate strength. The 4 mm groove can be milled at almost any angle with any Lamello groove cutter.
Precisely fitting wood joining for all angles in carpentry work
Ideal connector for panels, as the material is weakened less than with a dowel
On-site assembling aid for face frames or covers
Butt joints from a material thickness of 13 mm
Installation tolerance longitudinal
± 1 mm
Installation tolerance radial
± 1 mm
Minimum workpiece width
71 mm
Minimum material thickness for edge cuts
8 mm
Minimum material thickness for surface cuts
13 mm
Minimum material thickness for centre wall machining