150 x 45mm DIAMOND HOLE SAWS

150 x 45mm DIAMOND HOLE SAWS

Stock Code: DP16440
Out of Stock
£119.32 (exc VAT) per EACH
£143.18 (inc VAT)
Quantity: - +
Not available to order

Descriptions

150 x 45mm P5-VBHS Vacuum Brazed Diamond Hole Saw are available for next day delivery from Brighton Tools

These special diamond hole saws benefit from fully exposed diamonds that are vacuum brazed directly to the cutting edge.
Vacuum brazing is a material joining process which offers significant advantages in terms of cleanliness, joint strength and integrity making the hole saws durable and convenient to use when drilling a vast variety of materials.
They are especially good for drilling porcelain.

Fully exposed diamonds joined by a vacuum brazing process, 10mm hexagonal fitting and pilot drill (supplied) to aid start up.

DP16440 150 x 45mm

Suitable for:

  • Bricks - Class A Engineering
  • Bricks - Class B Engineering
  • Bricks - Standard Facing Bricks
  • Cement Fibre Board
  • Clay Products
  • Composite Cladding and Panels
  • Concrete - Roof Tiles
  • Concrete Blocks - Lightweight 3 to 7 Newton
  • Concrete Blocks - Medium Density 7 to 12 Newton
  • Concrete Blocks - Solid Density 12+ Newton
  • Earthstone Worktops
  • Fibreglass
  • Glass Reinforced Plastic (GRP)
  • Granite - Blocks and Worktops
  • Laminated Products
  • Limestone
  • Marble - Blocks and Worktops
  • PE Polyethylene Plastic
  • PP Polypropylene Plastic
  • Quartz Worktops
  • Sandstone - Abrasive
  • Sandstone - Indian
  • Tiles - Ceramic
  • Tiles - Granite
  • Tiles - Limestone
  • Tiles - Marble
  • Tiles - Porcelain
  • Tiles - Slate

Usage advice:

  • Use the pilot drill to aid start up.
  • Before drilling porcelain, pre-drill a 6mm pilot hole
    using a diamond tile drill.
  • For best results when drilling tiles, apply a fine mist
    of water via a hand-held spray bottle.
  • Do not use unnecessary pressure, the weight of the machine
    is sufficient.
  • Using a slight oscillating motion whilst drilling can increase
    speed on some materials.
  • Use at speeds between 800 - 2000rpm.
  • For harder tiles use a slower rpm / for softer tiles use a faster rpm.

Size150 x 45mm

There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!