CLAMEX P-10 MEDIUS WITHOUT LEVER (Box of 2000)

Stock Code: 145369

Out of Stock

Descriptions

Lamello Clamex P-10 CNC Connectors are available from Brighton Tools

Delivery time for this item is 10 - 14 days

Detachable connector for centre panels for materials from 16 mm thickness

Detachable furniture connector, installed in seconds
Supplement to Clamex P-14 for dividing panel connections from 16mm
Aesthetic look with the hardly visible 6 mm access hole
High clamping force for perfectly closed joints
Ideal for dividing panel connections in sideboards, shelves or cupboards

The Clamex P-14/10 Medius is a detachable furniture connector that is anchored in the positive-locking P-System groove in a matter of seconds. With a minimalist 6 mm opening, it is connected and released via a lever in a similar way to a cam connector. Developed as a supplement to the Clamex P-14, the Clamex P-14/10 Medius has the same advantages. These include excellent aesthetics due to the largely concealed joints, the small access hole, mitre connections at various angles and the powerfully joined, yet detachable connectors. The only difference with the Clamex P-14/10 Medius is the different-sized connector halves. If two shelves of the same height meet one dividing panel, the P-10-sized connector half can be inserted into the dividing panel from both sides. Due to the crescent-shaped recesses on the back of the connector halves, it is possible to connect dividing panels from 16 mm. With the Clamex P-14, a dividing panel of 28 mm would be required in this situation. This makes the Clamex P-14/10 Medius the ideal solution for the dividing panels in a piece of furniture.

Applications:

Concealed dividing panel joints from 16 mm with two shelves
Detachable connector for panel materials in furniture construction
Gluing aid for mitres or difficult-to-clamp angles
In furniture construction for high-quality furniture with mitre connections or special angles, wine racks or bookshelves
Stronger alternative to standard connecting fittings
Rapid prototyping in the development of new furniture ranges
Butt joints from a material thickness of 12 mm
Mitre connections from a material thickness of 18 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 1 mm
Installation tolerance radial	± 1 mm
Minimum workpiece width	75 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	16 mm
Minimum material thickness for angle bisector	18 mm
Adjustment Lamello-System	Max.
Adjustment P-System	P-10