CLAMEX P-14 FLEXUS CONNECTORS (80 Pairs)

Stock Code: 145315

2 In Stock

Descriptions

Lamello Clamex P-14/10 Flexus Connectors are available for next day delivery from Brighton Tools

Detachable furniture connector with flexible positioning pins

Detachable furniture connector, installed in seconds
Flexible positioning pins for retrofitting shelves
Aesthetic look with the hardly visible 6 mm access hole
All-rounder for all angle and miter joints from 22.5° to 180°
Ideal for furniture construction, sideboards, wine racks, inspection flaps

The Clamex P-14/10 Flexus is a detachable furniture connector that is installed into a workpiece in seconds using the Zeta P2 biscuit joiner. Thanks to the minimalist 6 mm opening, the Clamex P-14/10 Flexus is powerfully connected and released using a lever in a similar way to a cam connector. Developed as a supplement to the Clamex P-14, the Clamex P-14/10 Flexus has the same advantages. These include excellent aesthetics due to the almost completely concealed joints, the small access hole, mitre connections at various angles and the powerfully connected, yet detachable connectors. In contrast to the Clamex P-14, the Clamex P-14/10 Flexus does not have rigid positioning pins. The positioning pins are flexible and have an incline on both sides. This means that a workpiece can be inserted between two sides, locked in place and removed again. This function makes it possible to insert normal shelves or inclined shelves after the furniture has already been assembled. Since the positioning pins lock in place when pushed in, the shelf is held in the correct position until the workpieces are connected with a hex key. If a complex piece of furniture is connected to various vertical and horizontal workpieces, the order in which the pieces of furniture are installed does not matter. The positioning pins also provide anti-twist protection if only one connector can be used, such as in a base. This eliminates the need for a straightening dowel, as is usual for cam connectors.

Applications:

Detachable connector for panel materials in furniture construction
Joining cubes with six sides using mitre joints
Concealed installation of inspection flaps
For interior fitting in built-in cupboards, wardrobes under stairs or sloping roofs
In kitchen manufacturing in wine racks, in carcass manufacturing or in open shelf units
In furniture construction for high-quality furniture with mitres or special angles, wine racks or bookshelves
Butt joints from a material thickness of 12 mm
Mitre connections from a material thickness of 18 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 0 mm
Installation tolerance radial	± 1 mm
Minimum workpiece width	75 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	16 mm
Minimum material thickness for angle bisector	18 mm
Adjustment Lamello-System	Max.
Adjustment P-System	P-14 / 10
Tensile strength in particle board	710 N
Size (LxWxH)	64 x 21 x 9.7 mm