BISCO P-14 ALIGNING ELEMENTS (Box of 1000)

Stock Code: 145303

Out of Stock

Not available to order

Descriptions

Lamello Bisco P-14 Aligning Elements are available for next day delivery from Brighton Tools

Aligning element, suitable for the P-System groove

Plastic element for Clamex P and Tenso P
Align furniture parts flush together with Clamex P
Before gluing with Tenso P, check furniture for quality control with Bisco P
All angle and miter joints from 22.5° to 180°
Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm

The Bisco P is a plastic element. The aligning element fits into the 7 mm wide P-System groove. However, it is not anchored with positive locking like the Clamex P, but instead clamps in the groove due to its surface structure. It can be used like a wooden biscuit with PVA glue as a fixed joint. The Bisco P is used in combination with the Clamex P when only every second connector needs to apply clamping force and an aligning element in between is sufficient for joint flushness as an invisible and cost-effective alternative. Another application is the use for test connections before a workpiece is joined with a Tenso P and adhesive. The clamping force of the Tenso P is very powerful and, depending on the angle of the workpieces, disassembly may require a lot of force. It is therefore advisable to check the precision of the machining with a Bisco P. The Biscos are then simply removed from the grooves, replaced by Tenso P, adhesive is then applied and the workpieces are joined together. The Bisco P-14 is used in combination with the Clamex P-14 or Tenso P-14, the Bisco P-10 with connectors of size P-10.

Applications:

In combination with the Clamex P or Tenso P in furniture construction
Applications similar to the Lamello original wooden biscuit
Size P10: butt joints from a material thickness of 12 mm, mitre connections from a material thickness of 18 mm
Size P14: butt joints from a material thickness of 15 mm, mitre connections from a material thickness of 18 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 2 mm
Installation tolerance radial	± 0 mm
Minimum workpiece width	75 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	11 mm
Minimum material thickness for centre wall machining	21 mm
Minimum material thickness for angle bisector	18 mm
Adjustment Lamello-System	Max.
Adjustment P-System	P-14
Size (LxWxH)	65 x 27 x 7 mm