UNI/BASE UNIVERSAL BASE

Stock Code: TREUNIBASE

Out of Stock

Not available to order

Trend UNI/BASE Universal Bases are available for next day delivery from Brighton Tools

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes
It will fit directly to most routers
Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch
Instructions for fittingThe line-up pin fit into the collet and is plunged through the router base
The line-up bush is fitted into the Unibase and secured
This is then placed over the line-up pin and rotated in order to line up the fixing holes
The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes
These range from 10mm up to 30mm (GB10 - GB32)
For larger diameter cutters a 40mm guide bush (GB40) is available