LAMELLO CLAMEX S-20 CONNECTORS STARTER SET

Stock Code: 145247

1 In Stock

Descriptions

Lamello Clamex S-20 Connector Starter Sets are available for next day delivery from Brighton Tools

Detachable furniture connector for the 4mm groove

Detachable furniture connector with 4 mm thickness, fastened with screws
Size 20, ideal for thin materials, from 14mm material thickness
Aesthetic look with the barely visible 6 mm access hole
All angle and miter joints from 22.5° to 180°
Ideal for furniture with slopes, thin materials, kitchen worktops in HPL

The Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16 mm and is fixed in a groove by means of screws. Similar to a cam connector, the Clamex S-20 is connected and released via a lever through the minimalist 6 mm opening. The Clamex S-20 stands for perfect aesthetics due to the small opening of only 6 mm in diameter and enables joints to be almost completely concealed. It does not require glue, enables aesthetic joints at all angles and is ideal for fixed or detachable joints. The size of the Clamex S-20 is identical to the original size 20 wooden biscuit and the connector thickness is also 4 mm. This means that the 4 mm grooves, just like the wooden biscuit, can be milled with any biscuit joiner and at almost any angle. Each package contains a drill jig for access holes that can be drilled at any angle from 22.5°–180°. The narrow connectors are then inserted into the workpieces and fastened with two specially manufactured Clamex S-20 screws. Finally, the two workpieces are connected with a hex key. Time waiting for the glue to dry is therefore completely eliminated and an assembled workpiece can be further processed straight away or made available for shipping. Even if a Zeta P2 is available for milling P-System connectors, it may be useful to take a standard groove cutter to the construction site instead of the Zeta P2. A workpiece that needs to be adapted on site can be machined with a Classic X and mounted with a Clamex S-20, even if the rest of the furniture has been finished in the workshop with the Clamex P-14. Visually, this is not noticeable as the size of the hole is identical.

Detachable connecting fitting for panels
Gluing aid for mitres or difficult-to-clamp angles
Thin materials where very few detachable connectors are available
In kitchen manufacturing in open shelves or HPL kitchen worktops
For interior fitting in built-in cupboards, wardrobes under stairs or sloping roofs
In furniture construction for high-quality furniture with mitre connections or unusual angles, wine racks or bookshelves
Butt joints from a material thickness of 16 mm
Mitre connections from a material thickness of 14 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 1 mm
Installation tolerance radial	± 0 mm
Minimum workpiece width	71 mm
Minimum material thickness for edge cuts	8 mm
Minimum material thickness for surface cuts	16 mm
Minimum material thickness for centre wall machining	32 mm
Minimum material thickness for angle bisector	14 mm
Adjustment Lamello-System	20
Adjustment P-System	off
Tensile strength in particle board	490 N
Tensile strength in MDF	680 N
Tensile strength in beech	620 N
Shear strength in particle board	610 N
Shear strength in MDF	890 N
Shear strength in beech	1470 N
Size (LxWxH)	59 x 24 x 3.9 mm