LAMELLO CLAMEX S18 CONNECTORS (18 Pairs)

Stock Code: 145231

Out of Stock

Not available to order

Descriptions

Lamello Clamex S-18 Connectors are available from Brighton Tools

Delivery time for this item is 10 - 14 days

Detachable, flexible and simple. Installation in an 8 mm groove with screws

Detachable furniture connector with 8 mm thickness, fastened with screws
Aesthetic look with the barely visible 6 mm access hole
All angle and miter joints from 22.5° to 180°
High clamping force for perfectly closed joints
Ideal for open shelves, cupboards or wardrobes under sloping roofs

The Clamex S-18 is a detachable connector for the Lamello system and is screwed into an 8 mm wide groove. Like a cam connecting fitting, the Clamex S-18 is powerfully connected and released via a lever thanks to the minimalist 6 mm opening. The Clamex S-18 stands for perfect aesthetics due to the small opening of only 6 mm in diameter and enables joints to be almost completely concealed. It does not require glue, enables aesthetic joints at all angles and is ideal for fixed or detachable joints. The Clamex S-18 requires an 8 mm wide groove, which is milled to a depth of 15 mm and can be used with any Lamello biscuit joiner. With the 8 mm wide Clamex groove cutter, this is possible in one milling process. If the standard cutter (4 mm) is used, two millings are required, with the second milling offset by 4 mm with a spacer. A drill jig is used to drill access holes at all angles ranging from 22.5°–180°. The detachable connector is then inserted into the workpieces and fastened with two standard screws. Finally, the two workpieces are connected with a hex key. Waiting times for the glue to dry are thus completely eliminated and an assembled workpiece can be further processed straight away or made available for shipping.

Detachable connecting fitting for panels
Gluing aid for mitres or difficult-to-clamp angles
In kitchen manufacturing in open shelves or HPL kitchen worktops
For interior fitting in built-in cupboards, wardrobes under stairs or sloping roofs
In furniture construction for high-quality furniture with mitre connections or unusual angles, wine racks or bookshelves
Butt joints from a material thickness of 19 mm
Mitre connections from a material thickness of 18 mm

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 1 mm
Installation tolerance radial	± 0 mm
Minimum workpiece width	75 mm
Minimum material thickness for edge cuts	12 mm
Minimum material thickness for surface cuts	16 mm
Minimum material thickness for centre wall machining	36 mm
Minimum material thickness for angle bisector	18 mm
Adjustment Lamello-System	D
Adjustment P-System	off
Tensile strength in particle board	550 N
Tensile strength in MDF	790 N
Tensile strength in beech	1420 N
Shear strength in particle board	720 N
Shear strength in MDF	870 N
Shear strength in beech	2880 N
Size (LxWxH)	66 x 29 x 8 mm