INVIS MX2 CONNECTOR SET WITH 30mm STUD (Pack of 20)

Stock Code: 6012301

2 In Stock

Descriptions

Invis MX2 Connector Sets are available for next day delivery from Brighton Tools

Magnet-driven connecting fittings

Magnetically driven, detachable furniture connector
Enormously high clamping force of up to 250 kg per connector
Invisible connection for maximum aesthetics
Wear-free detachable with MiniMag Mx2 and cordless screwdriver
Ideal for high-quality furniture, lacquered or molded workpieces, tables, stairs

The Invis Mx2 is a unique, magnet-driven furniture connector for the highest demands in terms of aesthetics, stability and productivity. With no visible openings, the Invis Mx2 is quickly connected and disconnected via its magnet drive. The rotating MiniMag tool drives the screw inside the connector contactlessly and invisibly. The connector set requires two Ø 12 mm holes in both workpieces for preparation. A stationary drilling machine, a CNC machining centre or the Rasto drilling jig supplied in the starter set can be used for these holes. It is important for the holes to be drilled with the necessary precision. The scope of delivery includes an insertion jig for the vertical screwing in of the insertion nut. The Invis Mx2 connector is screwed in without an insertion jig and automatically aligns itself vertically due to its length. The MiniMag and a cordless drill close the joint and apply a joint clamping force of up to 250 kg per connector. To achieve this high clamping force, the magnet-driven connector must be installed as close to the panel surface as possible. The distance from the outer edge to the centre of the connector must not exceed 15 mm. The detachable furniture connector opens when the direction of rotation on the cordless drill is changed. The connector is ideal if clamps or other clamping aids would leave marks on components with a high-gloss finish or would slip off moulded workpieces. The Invis Mx2 is also used to secure access flaps or to screw the last workpiece of a larger piece of furniture in an invisible manner.

Fully hidden and detachable connecting fittings
Assembly of table legs, steps on wooden stairs, or handrails
Joints in workpieces with a high-gloss finish or that are moulded
Shelves or larger pieces of furniture detachable for transport
Invisible locking mechanism on display cases or drawers

Lamello Catalogue (21 MB)

Installation tolerance longitudinal	± 0.1 mm
Installation tolerance radial	± 0 mm
Minimum workpiece width	18 mm
Minimum material thickness for edge cuts	18 mm
Minimum material thickness for surface cuts	15 mm
Tensile strength in particle board	1220 N
Tensile strength in MDF	1460 N
Tensile strength in beech	3280 N
Shear strength in particle board	600 N
Shear strength in MDF	740 N
Shear strength in beech	2090 N
Size (LxWxH)	14 mm